9
2.3 Equipment Connections
2.3.1 Display Connection
Alpha300 can support two kinds of output mode: TV-OUT
(AV interface) and VGA-OUT(VGA
interface).Devices supporting external output are: CRT TV (support TV-OUT), LCD TV (support
TV-OUT & VGA-OUT ), computer display (support VGA-OUT).
After unpacking AV cable , one end connects to device’s AV interface, the other end connects to
Alpha300. When doing it, you should pay attention to connecting the three interfaces of AV cable with
the corresponding color on the device.
Warning:Alpha300 does not support two display at one time!
2.3.2 Network Connection
Alpha300 supports wireless(802.11b/g)
、
wired(10/100Mbps) network connection, and dial-up
mode such as ADSL
,
GPRS/CDMA/EDGA/WCDMA/3G etc.
A. Alpha300 has a built-in wireless adapter, you can set up network by following correct setup
procedures.
B. Plug in your Ethernet Cable into the Ethernet Port of Alpha300(as 2.2) and after Ethernet-LED
light is on, then you can set up network by following correct setup procedures.
C. Plug in USB Modem into the USB Port, then you can connect to network by following correct
setup procedures.
2.3.3 Power Connection
After unpacking the power adapter, connect one end to DC-in Port of Alpha300 and the other end to
power socket.
Warning: Operate the unit only using a power source of 5V/3A.
2.3.4 USB Keyboard & Mouse Connection (Optional)
Alpha300 supports USB Keyboard and USB Mouse, you can plug them into any USB port to use
them.
2.4 Indicator Instructions
Alpha300 LED indicator from left followed by Power-LED, Sleep-LED
,
Harddisk-LED,
Ethernet-LED(as 2.2) .
Power-LED: shows that the unit is on
Sleep-LED: shows that the unit is in sleep mode
Harddisk-LED: shows that the unit is reading and writing disk
Ethernet-LED: shows that Ethernet Cable has been plugged into unit correctly