SKYTERRA Msat G2 User Manual Download Page 7 | Manualshive

Page: 7 / 40

SKYTERRA Msat G2 User Manual Download Page 7

OTHER ELECTRONIC DANGER WARNING

To reduce the risk of fire or electric shock, do not submerse
this product in water. Do not expose this product to rain or
moisture unless it is specifically intended for outside use.

FUSE REPLACEMENT

Replace fuses with the same type and rating for protection
against risk of fire.

BLAST/RF WARNING

Do not operate the MSAT-G2 Radio in areas where explosives are
in use as the RF energy may cause hazardous conditions. Do not
operate the MSAT-G2 Radio where two-way radios are prohibited.
Turn the MSAT-G2 Radio off while at a petrol filling station or
near fuels or chemicals.

INSTALLATION WARNING

This product is to be installed by Authorized Service Centers.
The TU requires air cooling. Do not cover the TU or otherwise
impede the flow of air across the unit.

QUALIFIED SERVICE WARNING

Do not disassemble this product as there are no serviceable parts
inside. This product should be serviced by an authorized Service
Center when service or repair work is required. Personal injury
may result if the transceiver unit or antenna unit is opened when
power is applied.

ACCESSORIES WARNING

Use of non-approved accessories can result in loss of performance,
damage to the MSAT-G2 Radio, fire, electric shock or injury.

CONNECTING DEVICES WARNING

Never connect incompatible products. When connecting the
MSAT-G2 Radio to any other device, read the device’s User
Manual for detailed safety instructions.

User Guide

iii

«
...
5
6
7
8
9
...
»

Summary of Contents for Msat G2









































Reviews:

No comments