_________________________________________________________________________________________________
Rev. 12/26/13 Page 3 of 5
Skytech SP1001H/L-TH
TO CHANGE THE SET TEMPERATURE
Press and hold the SET key until the desired set temperature is
reached. (By pressing and holding the set key the LCD screen set
numbers will increase from 45
0
to 99
0
then restart over at 45
0
) Next
release the SET key. The LCD screen will display the set temperature
for 3 seconds, then will flash the set temperature for 3 seconds, then the
LCD screen will default to display the room temperature.
TO DISENGAGE THERMO MODE
Press and release the MODE key or press the OFF CONYINUOUS
PILOT key to disengage the thermo mode. The word ROOM on the
LCD screen will not show when the thermo is not in operation.
NOTE: The highest SET temperature is 99
0
Fahrenheit
(32
0
Celsius
)
and the lowest temperature is (45
0
Fahrenheit
(6
0
Celsius
)
CONTINUOUS PILOT FEATURE
This feature allows you to change from a spark to pilot system to
a standing pilot system for appliances during Cold Climate to
keep the firebox warm.
To operate the CONTINUOUS PILOT FEATURE do the following.
ON OR OFF OPERATION
Press and hold the OFF CONTINUOUS PILOT key for approximately 5
seconds, until the word “PILOT” appears on the LCD screen.
NOTE:
The word PILOT
will appear on the LCD screen in ON mode)
CP (CHILDPROOF) FEATURE
This SKYTECH remote control includes a CHILDPROOF “LOCK-OUT”
feature that allows the user to “LOCK-OUT” operation of the appliance,
from the TRANSMITTER.
SETTING “LOCK-OUT” –(CP)
•
To activate the “LOCK-OUT” feature, press and hold the ON
H/L key and the MODE key at the same time for 5 seconds.
The letters CP will appear in the TEMP frame on the LCD
screen.
•
To disengage the “LOCK-OUT”, press and hold the ON H/L
key and the MODE key at the same time for 5 seconds and the
letters CP will disappear from the LCD screen and the
transmitter will return to its normal operating condition.
•
To verify that transmitter is in the CP lock-out mode press any
key and the LCD screen will show “CP”
ROOM
TEMP
ROOM
TEMP
SCREEN IN THE
THERMO “ON” MODE
SCREEN IN THE
THERMO “OFF”
MODE
SCREEN IN THE ”CP” MODE
TEMP
SET
TEMP
SET
SCREEN AT LOWEST
THERMO SETTING
SCREEN AT
HIGHEST THERMO
SETTING
ROOM
TEMP
PILOT
SCREEN IN THE
CONTINUOUS PILOT
MODE
