Skytech firegear Outdoors FPB-36L Series Combining Linear Burners Download Page 1

Page: 1 / 4

6.875” (Min.)

Cradle Bracket

Pilot C

Butt Ends Together

Cradle Bracket

Extension Bracket

Figure 1

. Side view of burner showing extension

bracket.

Combining Linear Burners

Figure 2.

Top view installation

NOTICE:

Please be aware that when you are combining two linear burners together it is extremely important to size the

gas line for the total Btu’s of both burners together.

The FPB-36L, FPB30L and FPB24L Series fire pits can be combined in various combinations to create a longer length fire

pit look. This is accomplished by removing the extension bracket (Fig. 1) outlined in the drawing above from each linear

burner you are wanting to combine together. The extension bracket has the angled end and is secured with two screws

on each side. Simply remove the screws and slide the extension bracket off from each burner. Butt the two non-pilot

ends of each burner tight together and keep them level to provide the appearance of one long linear burner (Fig. 2).

REV. 4-6-16

Summary of Contents for firegear Outdoors FPB-36L Series

Page 1: ...tu s of both burners together The FPB 36L FPB30L and FPB24L Series fire pits can be combined in various combinations to create a longer length fire pit look This is accomplished by removing the extens...

Page 2: ...TFS 58 25 long x 6 875 wide 77 000 77 000 FPB30L MT FPB24L MT 58 25 long x 6 875 wide 80 000 80 000 FPB 24LTFS FPB 24LTFS 52 25 long x 6 875 wide 70 000 70 000 Table 1 IMPORTANT Ensure you have prope...

Page 3: ...for up to 20 seconds and the fire pit will turn ON 4 If the fire pit does not light the module will beep one time every second indicating an ignition error This is a hard lockout If this occurs press...

Page 4: ...linear fire pit for additional information Leave this insert for fire pit for lighting instructions FOR TECHNICAL SERVICE CALL Firegear Outdoors 9230 Conservation Way Fort Wayne IN 46809 For Sales 888...