21B-2L, 429 - 1 Nonhyun-Dong, Namdong-Gu, Incheon, Korea
T. +82-32-821-4731~5 , F. +82-32-821-4736 , E-MAIL. [email protected]
FLYING INSTRUCTION
Warning
!
The moving part of the gearbox on this bird can be dangerous! Use extreme care when
testing your bird. Do not allow your hands, fingers or any article of clothing to get near
the gearbox.
Power on, Adjustments, and Check Points
1. Turn on the transmitter.
CAUTION: Before you turn on the transmitter, please make sure that Cybird is off.
2. Turn on the switch on the Cybird body and you will
hear a BEEP sound. Press the UP button and
Cybird will BEEP two times. Finally, press the
DOWN button and the tail wing will move to neutral
position. Now setting procedure is completed.
CAUTION: Before setting procedure is completed,
Cybird will not respond to transmitter button
controls.
3. In case, the tail wing is not aligned correctly after
setting procedure, adjust the tail wing position by
rotating neutral position adjuster with screw driver.
(Refer to the right picture)
CAUTION: If the tail wing is not aligned correctly
Cybird cannot fly normally.
4. Firmly grasp the Cybird body and slowly move the
throttle up to full power position to make certain the
wings are flapping properly. Move the throttle to the maximum and minimum power
position few times to check how it works.
5. Push the LEFT and RIGHT button and check if the tail wing moves to the left and right
correctly. When you push the RIGHT button, the tail wing should move to the right when
looked at from behind the bird.
CAUTION: Always make sure before launching that the tail wing moves as you want.
16
