11)
Power cord protect ---Power cord do not be trampled or be pressed.
12)
Clean ---Clean this unit with a soft cloth. Prevent water to enter into inner.
13)
For device with AC power cord,check AC plug sheet and all of exposed metal parts with ohmmeter before using ,and
resistance ought to be more than 100K ohm.
14)
Stop period --- Unplug the power cord if the unit is not used for a long time.
15)
Prevent solid and liquid to enter into unit --- Be CARE FULLY ,DO NOT FALL SOLID OR SPATTER LIQUID AT
HOLE OF UNIT.
16)
Mangle for repair --- If cause following case ,refer to qualified service personnel:
A)
Power cord or plug mangle; or
B)
Inside of unit have falling solid or liquid; or
C)
The unit be rained ; or
D)
Device do not work; or
E)
The unit be fallen,or cover be mangle.
17)
Repair ---User do not repair unit except operating to depend on manual instruction. All of above symptoms should
refer to qualified service personnel.
18)
Ventilation --- Function of cover’s interval and hole is ventilation. It ensure operationg reliability and prevent to
overheat. Do not cover this hole absolutely. Do not place unit on bed , blandet, sofa or similar object’s surface .Do not
place unit in object’s inner,such as bookcase’s inner, Shelf’s inner etc.
19)
Accessories---Not use parts that manufactory do not recommend in order to avoid damage.
20)
Auxiliary equipment ---Do not place this unit on unstable vehicle,shelf,tripod or table. It will cause serious harm to
child or adult if the unit be fallen. Pleasel use the vehicle, shelf, tripod or table that manufactory recommen.
21)
Preventing thunderbolt---Add preventing thunderbolt equipment, or if the unit is not used for a long time, unplug the
power cord.
22)
Replace parts---If the unit require replacing part, you must replace with manufactory recommend, or same
characteristic part.
23)
Safety check---After repairing, repairer must test the unit for security.
Not On Use
Allow for sufficient heat dispersion when installed on a rack.
1)
Handle the power cord carefully.
Hold the plug when unplugging the cord.
2)
Keep the set free from moisture,water and dust.
3)
Unplug the power cord when not using the set for long periods of time.
4)
Do not obstruct the ventilation holes.(For sets with ventilation holes.)
5)
Do not let foreign objects in the set.
6)
Do not let insecticidese, benzene, and thinner come in contact with the set.
