4
3. TIME
BUTTON
Used this knob to choose the time mode : Elapsed time, remaining time or total remaining time.
4. REPEAT BUTTON
Use this button to repeat one track or all the track of the CD.
5. IN BUTTON ( LOOP SYSTEM )
This button sets the beginning of the loop. The Loop indicator on the display flashes.
6. CONTINU / SINGLE BUTTON
Press these to switch between the SINGLE and CONTINUOUS play mode. The selected mode is
indicated on the LCD. In SINGLE mode, after each track, the unit stops the reading. In
CONTINUOUS mode, the unit read all track and stops.
7. PROG
BUTTON
In STOP mode, you can program several tracks (20 tracks max.) :
-
Press the STOP button to enter in the stop mode
-
Press the PROG button to enter in the program mode
-
Use the skip track buttons to choose the track you want to listen then press the PROG button to
enter your choice.
-
Use one more time the skip track buttons to choose the track you want to listen then press the
PROG button to enter your choice.
-
Repeat the operation to select all the track you want to listen
-
Press the PLAY / PAUSE button to start the playback
8. OUT
BUTTON
When you press this button, you set the end point of the seamless loop and you start the loop. To
finish the loop, press again this button.
9. SD CARD PORT
Slot for inserting 3 IN 1 card. The contacts of the card must point downwards. The unit cannot
read cards with a capacity of more than 4GB. The unit is not compatible to SDHC cards and only
supports the MP3 format.
10. SKIP I<< BUTTON
use this switch to re-strart the track or to select the last track.
11. CUE BUTTON
Pressing the CUE button during play provides a return to the position at which play was started
12. +10 BUTTON
Use this button to jump of 10 tracks in one press.
13. PLAY / PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from
pause to play.
14. SKIP >>I BUTTON
Used this knob to select the next track.
15. PITCH CONTROL
use this fader to increase or decrease the speed of the track.
16. PITCH BEND + BUTTON
The pitch will automatically rise when the + button is pressed and return to the original pitch when
it is released.
