-
Slip the tooth ring first and then the nut onto the fixation axle.
-
Fasten the nut without damaging the color wheel.
-
Fix the color wheel with motor via the fixation on the motor to the pinspot housing and
tighten the screw.
Rigging
-
Mount the Pinspot with the mounting-bracket to your trussing system using an
appropriate clamp. The hole in the mounting bracket has a diameter of 10mm.
-
For overhead use, always install a safety-rope that can hold at least 10 times the weight
of the fixture. You must only use safety-ropes with screw-on carabines. Pull the safety-
rope through the hole in the mounting bracket and over the trussing system. Insert the
end in the carabine and tighten the fixation screw.
-
Adjust the desired inclination-angle via the mounting bracket and fix the bracket screws
tightly.
-
Connect the fixture to the mains with the power plug.
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of
the warnings contained in this manual.
SkyTronic UK cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
Technical specifications:
Pinspot Par 36
Power Supply: ................................................................................ 230V AC, 50Hz
Power comsumption: ...................................................................................... 30W
Weight: .............................................................................................................. 1kg
Dimensions (LxWxH): ................................................................... 150x120x115mm
Fitting Lamp: ................................................................................... 6V 30W Par 36
Color wheel w/ Motor
Power supply: ................................................................................. 230V AC, 50Hz
Rotation speed: ...........................................................................................2.5rpm
Colors: .............................................................................. Red, green, yellow, blue
Diameter: ....................................................................................................... 23cm