
BREAK-IN INFORMATION FOR YOUR MOTORCYCLE
The fist 1,600km is the most important in the life of your motorcycle. Proper running - in operation during
this time will help ensure maximum life and performance of your new motorcycle.
Motorcycle reliability and performance depend on special care and restraint exercised during running-in
period. It is important that you avoid operating the engine in the manner which could expose the engine parts to
excessive heat.
Please refer to the "running-in" section for specific running - in recommendation.
Please read this manual and following its instructions carefully.
To emphasize special information, the words WARNING, CAUTION and NOTE carry special meaning and
should be carefully reviewed.
IMPORTANT PRECAUTIONS
WARNING:
CAUTION:
NOTE:
The personal safety of the rider may be involved, disregarding this information could result in
injury to the rider.
These instructions point out special service procedures or precautions that must be followed
to avoid damaging the machine.
These provide special information to make maintenance easier or important instructions clearer.
1
CONSUMER INFORMATION
ACCESSORY INSTALLATION AND
SAFETY PRECAUTION TIPS
There are great varieties of accessories available to
Skyteam owners. The addition of unsuitable
accessories can lead to unsafe operation conditions.
For proper installation of accessories, we have laid
down some principles which will help you for the
correct choice and installation of accessories.
(1)If you want to install a accessory which will result
in a extra weight or a aerodynamic effect to your
motorcycle, try to install it as low as possible and as
close as possible to the center of gravity of your
motorcycle. Check carefully the holder for installing
accessories to make sure for its firmness. The infirm
installation will lead to unstable and dangerous
conditions due to weight deviation.
(2)Check the net clearance and turning angle to make
sure that they are adequate. The improper load, which
may occurs after installing accessories, will very likely
lower their safety factors, Checks should also be made
that this improper load will not hinder the idling, tuning
and other control actions.
(3)Fixing the accessories on handlebars or front fork
will result in unstable operation. This extra weight will
reduce the maneuverability of your motorcycle during
turning operations, meanwhile, this extra weight will
also cause unstable condition due to vibration at the
front end. Therefore, fixing accessories on handlebars
or front fork should be minimized.
(4)Things like wind glass, windshield, waist support,
bags across seat and suitcases all have a aerodynamic
effect on the stability of your motorcycle, when there
is a side wind or large vehicles passing by. The
improper installation or bad design of accessories will
2