WARNING
Don’t let the spark plug near spark plug opening aperture in cylinder head. Because the fuel
vapor in the cylinder can ignite and cause fire.
42
TROUBLE SHOOTING
If the engine can’t be started, please perform the following checks to find out the reasons.
(1)Whether there is sufficient fuel in the fuel tank.
(2)Whether the fuel flows from the fuel cock into the carburetor.
(3)Disconnect the carburetor and turn the fuel lever to “ON”position to see if there is fuel flowing out of
the hose.
(4)If the fuel has arrived the carburetor, then check the ignition system.
WARNING
Do not let fuel run off, always keep it in vessel. Keep the fuel away from the hot engine or
exhaust pipe. Keep away from any fire or hot material.
(1)Take off spark plug and connect it again to the inlet of spark plug.
(2)Turn ignition switch to “ON” position, make the spark plug close to the engine case and start the
engine. If the ignition system works normally, the blue flare flashed across the spark plug gap; if there is
no flare, you should consult with your dealer for the repair.
NOT ENOUGH ENGINE POWER
(1)Check the supply system of the fuel tank.
(2)Check the ignition timing of the ignition system.
(3)Check the idle speed of the engine.
WARNING
To prevent the possibility of lightening, you’d better not let the metal shield of the spark plug
touch the metal part of the engine that without painting. The people who has heart disease or
is fixed with a cardiac muscle frequency modulator should not do this work to prevent the
possibility of lightening.
NOTE
You’d better contact with Skyteam service station before the trouble-shooting. The repair
without Skyteam service station’s agreement may influence the content of the items of service.
43