FUNCTION KEYS
The atomic clock has four easy to use keys:
SET
key :
To enter into the set mode for the following functions: time zone, DST ON/OFF (daylight saving
time), language, hour, minute, year, month, day, weekday, 12/24 hour, ºC or ºF temperature
display
+
key :
To toggle between the seconds, temperature or weekday display
To change any values in manual set mode
ALM
key:
To enter into the alarm set mode
To set the alarm ON/OFF
SNZ
key :
To activate the snooze function during alarm
To display the alarm time in normal mode display
To exit the setting modes
MOON PHASE SYMBOLS:
The atomic clock automatically calculates and updates the moon phase diagram on LCD2. The phase display
will change approximately every 2 days, 11 hours. Whenever the date or time is changed manually, the atomic
clock will display the updated moon phase within a few minutes. Twelve stages of the moon’s phases are
represented.
New Moon Small Waxing Large Waxing First Quarter Small Waxing Large Waxing
Crescent Crescent Gibbous Gibbous
FullMoon
Large Waning Small Waning Last Quarter Large Waning Small Waning
Gibbous
Gibbous Crescent Crescent
Note:
The moon phase visible in the sky is noted by a darkening of the LCD screen. Therefore, a full moon is a
complete dark circle.
MANUAL SETTINGS
Note:
If the atomic clock has already successfully received the WWVB time signal and displays the correct time
and date, then the Manual settings can be skipped
.
After completion of the above described procedures in “
Setting up”
the manual setting modes can be entered
by pressing and holding the
SET
key for 3 seconds. The following settings can now be programmed:
Time zone setting
DST ON/OFF
Language display setting
Manual time setting
Year setting
Month setting
Date setting
Weekday setting
12/24 hour time display setting
ºC or ºF setting
