2
PLEASE NOTE: Scrolling tower means the clock is searching. Solid tower means the clock
did not catch the signal. Solid tower with WAVE OK means your clock has caught the signal
in the last 24 hrs.
Daylight Saving Time
If you live in an area that does observe DST, place the DST switch into the ON position. The
Letters DST will appear on the display next to the Atomic Signal ICON confirming you are
in the Daylight Saving Time mode. The clock will now adjust automatically each spring and
fall to correct for the 1-hour time change.
If you live in an area that DOES NOT observe Daylight Saving Time (DST), slide the DST
switch on the back of the clock to the OFF position to deactivate the DST function.
To enhance the Radio Signal Reception
Do not place the clock too close to household appliances such as Televisions, computers,
speakers, VCR’s and Fax Machines.
Do not place on top of or close to metal surfaces.
Do not place in a metal or concrete building unless close to a window with the curtains or
other window treatment open.
Do not use inside of a moving vehicle.
NOTE: RADIO SIGNAL RECEPTION MAY BE BLOCKED BY
Mountains and valleys
Tall buildings
Power plants, power lines or high voltage cables
Freeways and Airports
Construction Sites
Traffic Lights
Neon Lights
Bad weather between your location and the Atomic Clock in Colorado
Setting the Time Manually
Slide the SELECTOR BAR to the TIME SET position. The time display will flash.
Press the MONTH/HR button to advance to the correct hour.
Press the DATE/MIN button to advance to the correct minute.
When finished, place the SELECTOR BAR in the LOCK position.
When setting the time in the 12-hour mode, an AM or PM will appear on the display. AM and
PM are only visible in the 12 hour display
