Batarang
™
Wrist Strap
HOW TO USE CONTROLLER
D-Pad
A Button
Home Button
Power Button
Wrist Strap
Opening
Wrist Strap
Wrist Strap
Batarang
™
Motion
Controller
BACK VIEW
Trigger Button
1
4
Place your hand
through the wrist
strap and hold the
VRSE Motion
Controller and
tighten strap. Hold
firmly so that
controller will not fall
or fly off during play.
Thread wrist strap through
opening in Batarang
™
front.
Device Tray
Headset
1
Slide out smartphone tray from headset. Launch
the VRSE App on your smartphone and make
sure your device’s Bluetooth setting it turned ON.
3
Align smartphone so
that the headphone port
is accessible and plug in
headphones now.
2
Insert your smartphone into the tray by securely
positioning it under the clamp and align the middle
of the phone with the midline on the tray clamp.
Make sure the phone screen is facing forward.
NOTE:
You may need to adhere included Foam
Stickers to the tray to prevent the clamp from
pressing down on your smartphone’s side buttons.
Headphone Wire
(Not Included)
Headphone
Port
3
2
Place Motion Controller
into front section
of Batarang
™
.
Attach back of
Batarang
™
to
the front.
Batarang
™
Front
Batarang
™
Back
Motion
Controller
LOAD PHONE INTO TRAY
INSTALL BATTERIES
ASSEMBLE CONTROLLER
Headset
1
Adjust head straps on top and
sides to secure your fit.
ADJUST HEADSET AND LENSES
4
Slide tray back into headset.
Headset
Phone
Headphone Wire
(Not Included)
L
R
Foam Sticker
Foam Sticker
Headset
(Top View)
2
Adjust lenses by moving the sliders forward
and back and side to side. Keep adjusting
and trying different positions until the screen
image is in focus.
NOTE:
Make sure to remove protective films
from lenses.
1
3
2
Place batteries into the
battery compartment
(note correct polarity).
Place the compartment
door back on VRSE Motion
Controller and secure in
place. Do not over tighten
the screw.
Wrist Strap
Motion
Controller
Batteries to be replaced by an adult.
Open the battery compartment on the
back of VRSE Motion Controller using a
cross-head screwdriver.
Screwdriver
(Not Included)
REQUIRES
2x
Not Included
AAA (LR03) 1.5V
