5.740GHz
5.760GHz
5.780GHz
5.800GHz
5.820GHz
5.840GHz
5.860GHz
5.880GHz
5.725GHz
5.745GHz
5.765GHz
5.785GHz
5.805GHz
5.825GHz
5.845GHz
5.865GHz
5.733GHz
5.752GHz
5.771GHz
5.790GHz
5.809GHz
5.828GHz
5.847GHz
5.866GHz
5.705GHz
5.685GHz
5.665GHz
5.645GHz
5.885GHz
5.905GHz
5.925GHz
5.945GHz
BAND A
BAND B
BAND E
BAND F
BAND
CHANNEL
One button and LEDs for frequency selection method is easy and intuitive.
Frequency Selection: Single push to change frequency, push and hold for 2 seconds to change band.
As transmission power level regulations can vary between different geographical locations, the power
output can be adjusted. Press and hold the button for 5 seconds to switch power level from 25mW to
200mW, and vice verse. The band LED will blinking if the power output level is 200mW.
SELECT THE BAND
/
CHANNEL
INSTALLING BATTERY
3s LiPo 450mAh battery is
recommended, you can also choose
battery with similar size and capacity.
FRAME STRUCTURE OVERVIEW
1
2
3
4
5
6
7
8
9
10
11
12
13
13
10
10
14
15
16
17
19
18
-5-
-6-
The open source flight controller firmware that we chose to power the Sparrow is Cleanflight, mainly
due to it’s solid support and the OneShot ESC control protocol.
Because Cleanflight is constantly evolving, you will get the most updated setup instructions from
their website.
Naturally, if you get stuck or something is unclear, please visit
http://cleanflight.com/
To hook up the cleanflight configurator, hook up a personal computer via a standard micro-USB
cable, to the connector on the right side of the Sparrow FPV Racer.
SETUP SPARROW
20
21