2055 Laurelwood Road
Santa Clara, CA 95054-2747
+1 408 764 8000 or
+1 866 SKYPILOT (toll-free in the U.S.)
www.skypilot.com
© 2006 SkyPilot Networks, Inc. All rights reserved. SkyExtender, SkyExtender DualBand, SkyExtender TriBand,
SkyPilot, SkyPilot Networks, the SkyPilot logo, and other designated trademarks, trade names, logos, and
brands are the property of SkyPilot Networks, Inc. or their respective owners. Product specifications are
subject to change without notice. This material is provided for informational purposes only; SkyPilot
assumes no liability related to its use and expressly disclaims any implied warranties of merchantability or
fitness for any particular purpose.
Run the CAT5 cable attached to the power supply
through the gasket and plug it into the RJ-45 port
on the SkyExtender base.
3
Attach the omnidirectional antennas to the con-
nectors on the base of the SkyExtender DualBand
or SkyExtender TriBand.
Locate the photocell on the light pole(usually
located on top of the lumiere) and remove it from
the socket.
8
Plug in adapter
As the device powers up, check the LEDs on the
base of the SkyExtender. When both LED lights are
lit and steady, the device is successfully connected
to the network.
Connect the photocell adapter to the photocell
socket then reconnect the photocell by plugging
it into the receptacle on top of the adapter. Make
sure the excess photocell adapter cable is tightly
wrapped and secured—the space under the
mount stand will accommodate the coiled cable.
Activity LED
Notes
All SkyPilot devices must be configured to operate on wireless mesh network.
For information on configuring and troubleshooting a SkyExtender, see the SkyExtender
documentation available from the SkyPIlot web site.
Gasket
Ethernet
cable
Photocell
Attach the port cover with the provided screws,
making sure the CAT5 cable passes through the
cutout. Use cable ties to provide appropriate
strain relief for cabling.
7
Photocell
Photocell
Photocell
adapter
Port cover
5
Secure cover
and cabling
6
Attach antennas
(optional)
9
Check LEDs
Unplug photocell
4
Connect power
supply
Link LED
671-00020-01 Rev. A
