28
SP2602
User Manual
Set Position Report Interval To User
Command:
USP command is to set mode0(dynamic mode) and mode1(static mode) report interval
to user0 and user1.
Command format:
1.Set position report interval to user0:
<User Password>,USP0; <Mode>;<Interval>;<Report mode>;<Data format>
2.Set position report interval to user1:
<User Password>,USP1; <Mode>;<Interval>;<Report mode>;<Data format>
Parameter description:
<Mode>:
“0”: Report mode0, It’s called dynamic mode.
“1”: Report mode1, It’s called static mode .Valid only when command DNU is enabled.
<Interval>:
Report interval, range is “30 to 900 seconds”, “15 to 59 minutes”, “1 to 720 hours”.
The parameter unit definition as follow:
S: Second
M: Minute
H: Hour
<Report mode>:
“O”: Disable
“G”: GPS information prior, otherwise use GSM tower position instead, GSM tower
uses HEX format.
“L”: Periodical voice call (Voice monitoring).
<Data format>:
“O”: Device will not generate data.
“T”: Text
“W”: Map hyper link
