STEP 7
Slide the white plastic spinner base over the prop shaft. Then insert the folding propeller arm.
Finally, thread the spinner’s cone onto the prop shaft and tighten to ¼ turn past finger tight. The
spinner’s cone utilizes a brass threaded insert, for a positive grip onto the prop shaft. Do not
overtighten the spinner’s cone, and do not use Thread Locker of any kind on this assembly.
Note: the PNP version will have the propeller blades pre-installed onto the propeller arm.
STEP 8
Power on your radio transmitter and plug in the flight battery. If configured, activate your throttle
lock switch on your radio transmitter, to prevent accidental spinning of the propeller.
