manualshive.com logo in svg

Skymsen PA-14-N, Instruction Manual, Page: 5 / 24

Share
Download
Skymsen PA-14-N Instruction Manual Download Page 5

5

IMPORTANT

For mayor operator protection this equipment is provided with a safety system not 

allowing to be involuntary switched ON after an eventual energy shortage .

IMPORTANT

Make sure the cord is in perfect conditions for use. If it is not, change it for a new 

one in accordance with the technical specifications and safety rules .

The substitution shall be made by a qualified professional, and shall respect the 

local safety norms.

IMPORTANT

This equipment must not be used by children or any persons with reduced 

physical or mental aptness, lack of experience or knowledge, unless they are 

under supervision or have received from the person responsible for safety, proper 

instructions on how to use the equipment.

IMPORTANT

Children shall be watched in order to avoid them to play with the equipment.

IMPORTANT

In case of emergency take off the plug from its socket.

IMPORTANT

Never spray water directly on to the equipment.

CHA

VE GERAL

GENERAL KEY

DE

SLIGA / OFF

LIGA / ON

46913.0

1.1.18 Main Switch Label

Shows the Main Switch 

1.1.19 Original Characteristics Label

Call attention to the Original Characteristics of the equipment

Summary of Contents for PA-14-N

























Reviews:

No comments