01
1.2 Main Components
1. Introduction
02
1.1 Safety
02
02
2. Installation and Pre-Operation
2.1 Installation
03
03
4. General Safety Rules
4.1 Basic Operation Practices
4.4 Operation
4.2 Safety Procedures and Notes Before Switching the Machine On
4.5 After finishing the work
4.3 Routine Inspection
4.6 Maintenance
4.7 Advices
06
06
07
08
08
08
08
08
5. Problems Analysis and Resolutions
5.1 Problems, Causes and Solutions
09
5.2 Electric Diagram Model LS-04/06/08/10
09
09
3. Operation
3.1 Starting
3.2 Feeding Procedures
04
04
04
SUMMARY
2.2 Pre Operation
03
3.3 Cleaning
04
1.3 Technical Characteristics
03
08
4.3 Routine Inspection
4.3.1 Advice
When checking the tension of the belts or chains, DO NOT introduce your fingers
between the belts and the pulleys and nor between the chain and the gears.
4.3.2 Precautions
Check if motors, belts, chains or gears and sliding or turning parts of the
machine produce abnormal noises.
Check the tension of the belts and chains and replace the set when belt, chain or
gears show signs of being worn out.
When checking tensions of belts or chain DO NOT introduce your fingers
between belts and pulleys, nor between the chains and gears.
Check protections and safety devices to make sure they are working properly.
4.4 Operation
4.4.1 Advice
Be sure your hair is not loose in order to avoid getting caught by turning parts
which could lead to a serious accident. Tie your hair well up and/or cover your head with
a scarf.
The operation performed by not trained or skilled personnel shall be forbidden.
Never touch turning parts with your hands or in any other way.
NEVER operate machine without all original safety devices under perfect
conditions.
4.5
After Finishing The Work
4.5.1
Precautions
Always TURN THE MACHINE OFF by removing the plug from the socket before
cleaning the machine. Never clean the machine unless it has come to a complete stop.
Put all components back to their functional positions before turning it ON again.
Check level of oil. DO NOT place your fingers in between belts and pulleys nor
chains and gears.
4.6
Maintenance
4.6.1
Danger
Any maintenance with the machine in working situation is dangerous. TURN IT
OFF BY PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE.
4.7
Advice
Electrical or mechanical maintenance must be done by qualified personal for
such operation.
Person in charge has to be sure that the machine is under TOTAL SAFETY
conditions when working.
