background image

14

TABLE 02

PROBLEMS

CAUSES

SOLUTIONS

- The machine does not start.

- Electric energy shortage;
- Problem with the internal or 
external  wiring

- Check electric Energy source.
- Call Technical Assistance.

- The crown turns,however
when the product is pressed is
stops.

- The crown link is worn or
broke.

- Change the crown.

- Danaged cord.

- Transporta

ti

on accident.

- Call Technical Assistance;

7

2.1 Pre- Opera

ti

on

IMPORTANT

When placing the Crown, N° 09 or N° 10 , check if it is well 

fi

tt

ed

Be sure the Juice Extractor is stable. Before to use all the parts that will be in contact with 
the food to be processed, shall be washed with water and soap, See item 3.3 Cleaning..

3. Opera

ti

on

3.1 Star

ti

ng

The extractor shall be perfectly stable.
Remove the Lid N° 01 (Pic 01).
Be assured the Crown is well 

fi

tt

ed.

o start the machine place the ON/OFF Switch N° 06 ( Pict 01) on posi

ti

on ON.

The switch is 

fi

tt

ed on the machine base N°05 (Pict .01).

IMPORTANT

Wait the motor to be completely s

ti

ll when it is desired to change the Crowns.

3.2 Opera

ti

ng Procedures

The Juice Extractors are high speed machines.
First cut the orange or the lemon in two halves.
Start the machine and grab 

fi

rmly on half of the fruit , then press it on the crown N° 09 or 

N° 10 (Pict 01) , automa

ti

cally the fruit juice will 

fl

ow through the sieve into the cup N°08 

(Pict.01).

Summary of Contents for ESB











Reviews: