16
STEP 5 Set the Minutes.
Press and release the button to ad-
vance one minute. To move faster, hold
the button down. With the correct
minute on the display, press the Set
button and then the current unit of
temperature starts flashing.
STEP 6 Delete the Memory
When “dEL” and blinking “ ” symbol is displayed, if you do not want to delete
memory, press the Set button again to skip this step. If you would like to delete
ALL memory, press button, both “dEL” and “
” will flash. Press the
but-
ton again to delete ALL memory. “---”and “ ” are displayed on the meter. The
memory of this meter is empty now.
PLEASE NOTE
• The above settings can ONLY be changed in the setting mode. Therefore,
when you perform a glucose testing, those parameters are not possible to be
changed.
• Your meter displays 7-, 14-, 21-, 28-, 60- and 90-day averages which you can
access from the meter memory. These averages are calculated from results
obtained during the 7-, 14-, 21-, 28-, 60- and 90-day preceding the current date
and time settings. When the date and time are changed, the 7-, 14-, 21-, 28-, 60-
and 90-day averages may change.
• While the meter is in the setting mode, if no button is pressed for 3 minutes,
the meter will turn off automatically.
