1.
Front Panel
1.
MENU
: Shows the main menu and command box on the screen.
2.
POWER
: Turns on and off the power of the receiver.
3.
CH
: When watching, changing to the previous and next channel, or moves to the next higher
or lower item in the menu.
4.
VOL
: When watching a channel, adjust the volume or move to the left or right item in the
menu.
5.
4 digital LED display
: Shows program information at startup displays software and menu.
6.
OK
: Confirm the selected item in the menu.
2.
Rear Panel
1.
ANT IN
: Connects the terrestrial antenna cable.
2.
ANT OUT
: Use it to connect TV set or other STB.
3.
SAT ANT IN
: Connects the satellite antenna cable.
4.
SAT ANT OUT
: Use it to connect to other STB.
5.
RS-232:
Upgrades the STB Program & Software.
6.
VCR
: Connects your VCR via a SCART cable to this receiver.
7.
TV
: Connects your TV set via a SCART cable to this receiver.
8.
0/12V
: Chooses the LNB on the antenna.
9.
S/P DIF
: Output for connection to a digital amplifier.
10.
VIDEO OUT
: Video output.
11.
AUDIO OUT R/L
: Audio output.
12.
TV ANT IN
: Connects to the TV antenna.
13.
TO TV
: Connects to the TV set antenna input.
14.
~100-240V
(Auto-selectable), 50/60 Hz. Make sure to check the specification.
3. Main Menu
Once you have installed and connected the cables of the DSR the menu will be displayed.
This menu consists of 6 menu options as shown below.
1. User Installation
2. System Settings
3. Channel Manager
4. User Preference
5. Receiver Information
6. Game
During the installation the
OK
key confirms a selection
and
LEFT/RIGHT
key shows the Drop Down List box.
You can use the
VOL LEFT/RIGHT
keys to move from
4
