Skymaster NLC-751, User Manual

Page: 2 / 6

75W Multi function lights controller instruction manual
Thank you for choosing skymaster Multi function lights controller,which combine afterbuner
light/navigation light/gear light in one unit.With up to 75W output,it can connect 25pcs of LED
lights(each with 3W ultra lightness). This product is also compatible with S-BUS system. Customers
can freely set up signal channels.With simply one connection wire,all functions can be
controlled.Controller is made of aluminum alloy.It is smaller,but stronger and durable.It is suitable
for 99% of jets in the market.You will enjoy convenience after installing this controller.
Product specifications:
1.input voltage:2S/7.4V
2.lighting mode: 5 flashing modes,lightness can be adjusted.
Quantity of output lights:
Left wing:2 lighting sets(maximum 4pcs of lights with 3W each)
Right wing: 2 lighting sets(maximum 4pcs of lights with 3W each)
Vertical fin/belly: 1 lighting sets(maximum 3pcs of lights with 3W each)
Landing gear: 2 lighting sets(maximum 3pcs of lights with 3W each)
Afterburner:1 lighting set (Y wire is needed for 2 lighting rings)
3.output expanding device: output for maximum 4 lighting sets ,supplied with r esistance
lamp,simply plug in and work
4.Input channel signal control(to the Receiver):
Gear(refer to landing gear light channel)
Nav.(refer to navigation light channel)
A/B (refer to afterburner light channel)
S-BUS
5.Measurement:69*35*10mm
Warning:
1. Before using this controller,pls make sure to read manual.The device will be damaged when any
socket is plugged in by error or polar short-circuit .
2. Before setting up function,pls prepare transmitter or servo adjust equipment.Most of incoming
setting is completed by transmitter or servo adjust equipment.
3. The quality of Led lamps are different.Some are good,some are pad.Pls choose reputable
product or use ones supplied by our company
4. In the process of brightness adjustment,all channels lights are shining all the time,so you can
watch and compare sameness of brightness.The other advantage is LED lamps life will be
extended by proper adjustment of standard brightness,instead of damage caused by high power
for long time.
5. During adjustment of brightness, when brightness is not increased even after further
adjustment,pls stop increasing brightness.It means this is maximum brightness already.When
you continue to adjust it, only more hotness is caused,and it doesn't help energy conservation;