E_MH_Mounting_instructions_Skylux_Cintralux_Alu_25mm_fixed_parts_flat_curb
01/04/2020
18/20
11. Corner sheets
Finish the four corners of the barrel vault with the
corner sheets 47475. Screw the corner sheet 47475 tight with
the three
screws supplied 4.2 x 16 mm 22433.
12. Checking arch tension
Check that the top arches LP502 and side top arches LP512 are tensioned evenly at all points across the sheets.
Gently
tighten the M8 x 60 mm bolts where needed.
Maintenance
The client must perform annual maintenance on the opening parts of the Cintramax and on the fixed parts of
the barrel vault. At minimum, this maintenance includes cleaning of the sheets with water and a light PH-neutral
soap. All fastenings must be checked and loose or damaged parts of the Cintramax must immediately be fixed or
replaced with original parts as described in the Cintralux ETA.
At least once a year the condensation drains (in the lateral profile, etc.) need to be cleared and the inside of the
lateral profile cleaned.
Snow and wind load
The barrel vaults are designed for normal wind and snow loads. For specific locations (seaside or very high
buildings > 12 m), this should always be specially calculated.
47475
Corner sheet
Screw
Ø 4,2 x 16 mm
47475
Corner sheet
