Use the supplied VGA cable to
connect the VGA output from
your computer to this INPUT port
Plug a local monitor
into this OUTPUT port
Connect the power
supply to this socket
Connect the CAT5 cable to
this RJ-45 port
The Power LED will illuminate
when the power is connected
Product Connections & Installation
Make the following relevant connections BEFORE powering up your computer and monitor(s)
CAT5 VGA Extender, Local Transmitter Unit
CAT5 VGA 8 Port Extender & Splitter
Connect one CAT5 cable for
each remote monitor, to these
RJ-45 ports
Use the supplied VGA cable to
connect the VGA output from
your computer to this INPUT port
Plug a local monitor
into this OUTPUT port
The Power LED will illuminate
when the power is connected
Connect the power
supply to this socket
Using a Philips screwdriver, adjust the EQ control until any shadowing effect,
as illustrated on the left hand side, is reduced to an acceptable level, as on the
right. Adjust the GAIN control until you achieve a satisfactorily bright picture.
CAT5 VGA Extender, Remote Unit
Adjusting the Remote Monitor Picture Quality
On the base of the unit, the CAT5 VGA Extender Remote provides controls for adjusting and
improving the picture quality of the connected remote monitor.
EQ: Equalisation adjustment (sharpens the picture)
GAIN: Adjusts picture brightness
A good method to check and adjust the picture quality is to display a high contrast image, with
vertical edges, on the remote screen. Launch a word processor and type a large capital ‘H’ in
the centre of the screen. Use a bold black font, with a size of 72 points or higher, on a white
background.
Plug the remote
monitor into this
VGA IN port
Connect the power
supply to this socket
Connect the CAT5 cable to
this RJ-45 port
The Power LED will illuminate
when the power is connected