Stepfold Podium 1
Stepfold Podium 2
Platform Height
1m & 1.2m
1.2m & 1.45m
Safe Working Load
150Kg
150Kg
Dimensions
0.6m x 0.65m
0.6m x 0.65m
Unit Weight
41 Kg
43.5 Kg
STEP FOLD
PODIUMS 1 & 2
The Step Fold Podiums
Assembly Instructions
Ensure all parts are present and are not damaged before
assembling
Kit List
– Podium 1 / 1m & 1.2m
4 x K548 -
5” Castors / SFBP - Base Plates
1 x SFP1
– 1m Podium Base Unit
2 x Stabilizers (SFST/L - Left & SFST/R -Right)
2 x SFGB
– Guardrail Horizontal Braces `
2 x SFHB - Ribbed Brace
2 x SFSP - Step Platforms
1 x SFPP - Main Platform
Kit List
– Podium 2 / 1.2m & 1.45m
4 x K548 -
5” Castors / SFBP - Base Plates
1 x SFP2 -1.2m Podium Base Unit
2 x Stabilizers (SFST/L - Left & SFST/R -Right)
2 x SFGB
– Guardrail Horizontal Braces
3 x SFHB - Ribbed Brace
2 x SFSP - Step Platforms
1 x SFPP - Main Platform
Step by step guide
Always work on the podium with the knuckled gate facing the work area.
When leaving the podium, always descend, facing the knuckled gate
.
1. Open the unit on a
firm and level base
lock the folding gate
section.
3. Fit the small
platforms on rung 1 &
2 to form the steps up
to the platform.
5. Fit a ribbed brace on
the rung below the
platform.
6. Fit stabilizers, left
& right.
7. Ascend to the
platform using the step
platforms and ribbed
brace.
8. Once the platform is
accessed, close the gate
behind you; ensure that
the clips are engaged.
9. To extend the unit.
Whilst standing on the
platform, extend the
top frames & Fit 2
horizontal braces.
10. Fit 2 guardrail
braces front and
back by swinging
them into place
11. When descending
from the platform, use
the step platforms
and face the knuckle
frame.
12. Fit the non-slip ribbed
brace to the 2nd rung
above the step platform.
(Hooks facing outwards)
The Stepfold Podium 1
would include 1 of these
braces in this position
13. Access the
platform using the
step platforms and
non-slip ribbed rung.
14. Once the platform
is accessed, close the
gate & swing the
horizontal brace back
onto its previous
position and begin
work.
Please Note: Stepfold Podium 1 is assembled in the same way as
Stepfold Podium 2, with just 1 less horizontal brace.
Podium 2
2. Fit a ribbed brace
above the lowest
collar as shown.
4. Fit the working
platform on the 4th
rung.
Manufactured To a TUV Certified ISO 9001:2008 Quality Control System
Fully Approved & Certified to the PAS250 Standard for LLWP (Low Level Work Platforms)
Podium 1
