1. Attach each support bar using
(2) ¼” bolts and (2) ¼” nuts.
Make sure to attach the support
bar underneath the bed frame.
Note:
Twin/ Full/ Queen = 1 support bar
King/California King = 3 support bars
Step 4
2. Attach each support leg to the
bar using (1) 1” x ¼” bolts and
(1) ¾” washer.
Note:
Twin = 1 support leg
Full = 2 support legs
Queen = 3 support legs
King/California King = 6 support legs.
(2 legs for each support bar)
Step 5
1
2
(Queen bed frame image displayed)
1. Use (6) 1” x 5/16” bolts,
(6) 1 ¼” washers to attach rails
to bed frame loosely. Screw in
side rails before attaching the
foot rail.
2. Push side rails towards foot
rail, so that there is no gap.
