background image

14

SKYHYDRANT

 - USER GUIDE & DATA SHEET

WEIGHT & DIMENSIONS

UNIT DIMENSIONS & MASS

 (Approximate) 

SHIPPING DIMENSIONS & MASS

 (Approximate – Shrink Wrapped 

Model Number

SkyHydrant

MAX

  (SH1200)

SkyHydrant

GEM  

(SH600)

Model Number

SkyHydrant

MAX

  (SH1200)

SkyHydrant

GEM

  (SH600)

Height (cm)

143

82 

Depth (cm)

18

18

Width (cm)

25

25

Mass (kg-dry)

13

9

Mass (kg-wet)

32

21

Height (cm)

150

90

Depth (cm)

20

20

Width (cm)

28

28

Mass(kg-dry)

18

12

FILTRATE QUALITY

TERMINOLOGY

IMPORTANT OPERATING INFORMATION

Ppm 

Parts per Million

NTU 

Nephelometric Turbidity Units (a measurement of turbidity)

Um =  Micron
M =  Metre

•  The filter sub-modules located inside the SkyHydrant is to remain in a wet environment to avoid the 

membrane drying which would result in total and permanent loss of performance. If long-term storage is 
necessary after operation, the unit is to be rinsed with a solution of sodium hypochlorite (100ppm) and stored 
at a temperature not above 40˚C, out of direct sunlight.

•  When SkyHydrants are being used for the first time it is recommended that a chlorinated backwash be carried 

out before the filtrate is used.

•  The filter sub-module is resistant to oxidising agents such as chlorine, chloramines, bromine, bromamine, 

and potassium permanganate. Maximum exposure of sub-modules to bromine, bromamine, potassium 
permanganate, and other oxidants should be checked prior to starting operation.

•  The SkyHydrant comprises a single MEMCOR

®

 membrane sub-module located inside in a low-pressure 

housing. The unit is suitable for operation under low positive or negative head pressure. Raw water flows 
along the length of the hollow fibres before being forced through the walls of the fibre to produce a filtrate 
virtually free of suspended solids. The unit removes virtually all solids and bacteria and significantly 
reduces virus levels.   Filtrate flow rate is controlled manually.

Parameter

Bacteria

Virus

Coliform

Cryptosporidium

Parameter

Giardia

Algae

Turbidity

Log Reduction Value

>6 99.9999%

>3 

99.9%   

>6 99.9999%

>6 99.9999%

Log Reduction Value

>6 99.9999%

>6 99.9999%

<0.02

Summary of Contents for SkyHydrant-GEM





















Reviews: