Page 42
December 2007
Rough Terrain Scissors
TM
Component Identification (Special Options)
Operation - Section 3
3.6 Component Identification
(Optional Equipment/Attachments)
This section describes the components that are optional
to MEWPs.
3.6-1 Outrigger/Generator Control Console
(Auto-leveling) (If Equipped)
The outrigger/generator control console is located
next to the platform control console. These switches
control the generator, and outriggers’ extension and
retraction.
4
1
2
5
3
Figure 3-4. Outrigger/Generator Control Console with
All Options
1. Generator Switch
- This switch activates the
generator.
2. Outrigger Extend/Retract Switches
- These
switches control the extension or retraction of
each individual outrigger.
3.
Auto-level Switch
- In the “
” extend position,
each outrigger extends and automatically adjusts
until MEWP is level. In the “
” retract position,
the outriggers retract.
4.
Outrigger Enable Switch
- This “
” outrigger
enable switch, when in the extend or retract
position, activates functions on the auto-level
switch and outrigger extend/retract switches.
5.
Leveling Indicator Light
- This light illuminates
to display the status of the outriggers when the
auto and manual level functions are in use. The
indicator light has the following states:
Off:
The outriggers are fully retracted.
Flashing Rapidly:
The outriggers are extending
but the platform is not level.
Flashing:
The outriggers are extended but the
platform is not yet level.
Solid:
The outriggers are extended and the
platform is level.
3.6-2 800W AC Inverter (If Equipped)
The inverter is located on the base of the MEWP. It has
the following controls:
1
2
3
Figure 3-5. 800W AC Inverter
NOTE
The inverter operation is automatic. These
controls do not need to be manipulated
for normal operation.
1.
Status LEDs
- These LEDs indicate the operating
or fault status of the inverter.
2.
ON/OFF Wire
- This wire is the connection to turn
the inverter on.
3.
15 Amp Circuit Breaker
- In the event of a power
overload or circuit grounding, the circuit breaker
pops out. Push the breaker back in to reset.
Summary of Contents for SJ6826 RT
