238264AAA
SJ45 AJ+, SJ60 AJ+
74
Section 6 – Additional Procedures
Chassis tilt recovery
6.2 Chassis tilt recovery
IMPORTANT
When you raise or extend the boom, the MEWP
must be on a firm, level surface.
WARNING
Tip-over hazard. If the tilt settings are exceeded,
the alarm makes a sound and the light illuminates.
The platform must be lowered and retracted
immediately (refer to
Section 3.4-6
)
. If you do not
obey, there is a risk of death or serious injury.
6.2-1 Platform uphill
If the MEWP becomes tilted with the platform uphill
(refer to
Figure 06
), follow the steps below to go back
to a lowered and retracted position.
1.
Fully lower the main boom.
2.
Fully lower the riser.
3.
Fully retract the boom.
4.
Drive to a firm, level surface.
6.2-2 Platform downhill
If the MEWP becomes tilted with the platform downhill
(refer to
Figure 07
), follow the steps below to go back
to a lowered and retracted position.
1.
Fully retract the boom.
2.
Fully lower the riser.
3.
Fully lower the main boom.
4.
Drive to a firm, level surface.
Figure 06
Platform uphill
Figure 07
Platform downhill
To
order
go
to
Discount-Equipment.com