Skyjack SJ-7027 Operating, Maintenance And Parts Manual Download Page 104

Page: 104 / 216

SECTION 6, Page 7

SJ-600 Series Engine Powered

112715

June 2001

Index

No.

Skyjack

Part No.

Description

Units

per

Assy.

FIGURE 6-1. MAIN PLATFORMS AND RAILINGS (continued)

Parts list continued from the previous page.

117277

• HINGE, Spring return

(Models with serial # 31275 and above)

103632

• • SCREW, Self-tapping 1/4-14 x 3/4" lg.

109388

• HINGE, Spring return

(Models with serial # 31274 and below)

103856

• • BOLT, Hex-hd 1/4-20 x 3/4" lg.

104000

• • WASHER, Lock 1/4"

103980

• • NUT, Hex 1/4-20

103632

• • SCREW, Self-tapping 1/4-14 x 3/4" lg.

110693

• STOP, Latch

103632

• • SCREW, Self-tapping 1/4-14 x 3/4" lg.

105307

• PLATE, Latch release

105312

• GUIDE, Spring

103107

• SPRING, Compression

109377

• PIN, Latch 5/8 x 4-3/16" lg.

300792

• PIN, Cotter 3/32 x 1-1/4" lg.

752726

• PIN, Locking 3/8"

300833

• CABLE, Lanyard 6" lg.

103995

• WASHER, Flat 1/4”

103632

• SCREW, Self tapping 1/4”

111123

• WELDMENT, Scissor mount

103909

• • BOLT, Hex-hd 1/2-13 x 1-1/4" lg.

103470

• • WASHER, Lock 1/2"

103468

• • WASHER, Flat 1/2"

100695

BUSHING

111597

• BRACKET, Scissor cable mount

100702

• CAP, Railing end

113164

• U-CLIP, Control Box

355071

• SPACER PLATE, Railing

300406

• GAGE, Cross Level

201121

• PLATE, Level

355079

• GUARD, Level

125584

• RING KIT, Safety

113122

• • BRACKET, D-Ring

114989

• • D-RING

103473

• • BOLT, Hex head 3/8 - 16 x 1” grade 5

103472

• • WASHER, Flat 3/8 S.A.E.

104606

• • NUT, Nylon lock hex 3/8-16 grade 5

103960

• BOLT, 10-24 x 1/2

114711

• BOLT, RPHMS #10-32 x 1/2

300158

• BOLT, FSHCS 10-12 x 1

300444

• SPRING, Level

104185

• WASHER, Lock 10-24

103987

• NUT, 10-24

110007

• TRIM, Protective edge guard

2”

Summary of Contents for SJ-7027

























































































































































































































Search results

Summary of Contents for SJ-7027

Reviews:

Related manuals for SJ-7027

Brands by name

Popular brands

Skyjack SJ-7027, Operating, Maintenance And Parts Manual

Search results

Summary of Contents for SJ-7027

Reviews:

Related manuals for SJ-7027

Brands by name

Popular brands