SKYJACK, Page 44
February 2008
Mid Size & Full Size RT’s
Engine Powered
Section 2 - Operation
Start Operation
2.10-9 To Extend or Retract Manual Extension
Platform
1
2
3
Figure 2-18. Manual Extension Platform
To extend/retract the manual extension platform,
1.
remove the locking pin (item 1) then remove the
push bar locking pins (item 2) and rotate the push
bar towards the main platform. Extend the push
bar until it locks at full extension and push/pull the
extension platform using the push bar.
Upon full extension or retraction, reinsert the
2.
locking pin on the platform (item 1) to prevent
accidental movement of the manual extension
platform during travel or transport.
When the push bar is not in use, pull the plungers
3.
(item 3) on the push bar and retract it, then rotate
it back to its resting position and lock it into place
with the locking pins (item 2).
