SkyGuardTWX Vision-Pro “978 UAT/1090 ES” ADS-B
Receiver Setup
This Receiver is a fully integrated 978mhz UAT and 1090mhz ES radio receiver along
with a WAAS GPS and WiFi transmitter. The unit is powered on by plugging the
provided DC power adapter into any aircraft power socket that provides either 12v or 24v
DC @ 1 amp. There are 3 antennas (2 long and 1 short) and a GPS receiver that must be
installed
prior to powering up the receiver
. The GPS receiver “puck” is plugged into
the ADS-B receiver with the “arrow” on the GPS plug pointing up. The 2 longer black
ADS-B receiver antennas is attached to the outside coax connectors adjacent to and at
same end as the GPS plug. As looking at the coax end plate, the left connector is the
978mhz receiver and the right connector is the 1090mhz receiver. The shorter WiFi
antenna and the DC power adapter plug are connected to the opposite side of the receiver.
See photo just below:
