Safety information
1.
Read
all
instructions
carefully
before
you
begin
this
installation.
2.
When installing batter y, pay attention to the batter y positive and negative polarity.
A long time without the remote control, remove the batter y.
When remote distance becomes smaller and insensitive, replace the batter y.
3. If no response from the receiver, please re-match the remote.
4.
Gently handle remote, beware of falling.
5. For indoor and dr y location use only.
User Manual Ver 1.0.5
Page 2
SCENE
S
ZONE
ZONE
ZONE
ZONE
1
2
3
4
SPEED
BRIGHT
MODE
M
CCT
RGB
Key function
Each zone can match single color, dual color(WW/CW), RGB, RGBW or RGB+CCT(WW/CW) controller or lamp.
Touch power key to turn on light, turn off light,
firstly long press power key 5 seconds, enter zone light setting:
long press Zone 1/2/3/4 key 2 seconds, select current zone you want to change,
then long press below five key 2 seconds to change current zone light type.
MODE
SPEED
BRIGHT
CCT
RGB
: Long press 2 seconds, set current zone as single color type.
: Long press 2 seconds, set current zone as dual color type.
: Long press 2 seconds, set current zone as RGB color type.
: Long press 2 seconds, set current zone as RGBW type.
: Long press 2 seconds, set current zone as RGB+CCT type.
For example, If you want to change zone 1 light type as RGB type,
please long press Zone 1 key 2 seconds firstly,
then long press 2 seconds will set Zone 1 as RGB type.
When in zone light type setting state, all above long press key operation, the LED indicator will lighten red and blue.
Short press power key or touch color wheel, quit zone light type setting.
RGB
Zone light type setting
Note:
●
For single color, touch RGB/CCT wheel only change brightness, RGB, MODE, SPEED key is unvalid.
●
For dual color, touch RGB/CCT wheel only change color temperature, RGB, MODE, SPEED key is unvalid.
●
For RGB, when touch CCT wheel, adjust color temperature by mix R/G/B channel.
●
For RGBW, when touch CCT wheel, adjust W channel brightness.
●
After touch power key to turn off light, long press power key 10 seconds will turn on or turn off tone.
Turn on/off all
zone
light.
RGB color / Color
temperature.
Press RGB or CCT key to switch between RGB wheel and CCT wheel.
Short press play 10 built-in mode, long press 2s run mode-cycle.
Short press turn on zone light and select zone simultaneously,
long press 2s turn off zone light.
4 zone control seperately or synchronously, each zone could control multiple receivers.
Only multiple zone have same light type can select synchronously.
ZONE
ZONE
ZONE
ZONE
MODE
SPEED
BRIGHT
SCENE
For dynamic RGB mode, adjust speed, short press 10 levels, long press 2s get the default speed.
For static RGB color, adjust saturation, namely change current static RGB color to mixed white slowly,
short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
Adjust brightness, short
press
10
levels, long press 1-6s for continuous 256 levels adjustment.
Short press replay scene. Long press 2s to save the current color into the scene.
4 zone recall or save synchronously.
CCT
RGB color, 24 levels.
RGB
For dual color or RGB+CCT(WW/CW), adjust color temperature by WW/CW channel,
short
press
11
levels, long press 2s get max or min color temperature.
For RGB, adjust color temperature by mix R/G/B channel,11 levels.
For RGBW, adjust color temperature by adjust W channel brightness,11 levels.
long press 2s get 100% or 0% White channel brightness.
T25-1 Wall Mounted Touch Panel
