15
4. Press the OK button to confirm.
5. your WaTCH will now search for your location. This may take a few
minutes as your WaTCH acquires a GPS signal.
6. When REaDy appears, the WaTCH is ready to track your session.
• To start or resume the Odometer, press the OK button.
• To pause the Odometer, press the OK button again.
• To mark a lap, press the BACK button.
• To change the display, press the UP/DOWN buttons.
• To reset/save your session, hold down the OK button until SAVED ap
-
pears.
IMporTAnT!
To avoid losing your session data, you must SAVE be-
fore changing modes. To avoid excessive battery drain, exit ODOMETER
Mode at the completion of each session after saving your data.
