8
9. Next, insert the joined wire into a blue
connector and push until the wire
reaches the end of the connector.
10. With a pair of pliers, clamp down on
the connector with some force to join
the wires together.
11. Repeat with the other wire. You can
connect the wires from your SkyBell
to either wire coming from your wall.
12. Turn your power back on.
13. Next, check SkyBell to confirm that
the LED light is on. The device LED
light will slowly blink red if the battery
is charging. The light will turn a solid
red when the battery is full. When the
device LED is a solid red, the device
is ready for the Syncing Process. This
normally takes less than 2 minutes
but can take up to 15 minutes for the
battery to charge.
14. Once you see the solid red light,
press the SkyBell button to confirm
that your current home doorbell
chime works correctly.
15. Next, gently place the SkyBell device
over the mounting plate. Make sure
