SkyBell HD, Manual, Page: 3 / 17

If you do not see the Add a SkyBell screen, do the
following:
•
Tap the Account button. The screen below will
be displayed.
•
Under the MY DEVICES section, tap the
+ Add New SkyBell button. This will take you
to the correct screen.
•
Tap the Continue button at the bottom of that
screen.
Step 4
Put the SkyBell device into Sync Mode . The
SkyBell device is in Sync Mode when the LED is
blinking red / green .
•
If your SkyBell device is already in Sync Mode
(LED blinking red / green ), tap the Continue
button at the bottom of the screen.
•
If not, press & hold the SkyBell device's
button (for approximately 15 seconds) until
the LED blinks green rapidly, then release the
button . Approximately 5-10 seconds after the
LED starts blinking green the LED will change
to blinking red / green . Then, tap the Continue
button at the bottom of the app screen.