SkyBean SkyDrop, User Manual, Page: 11 / 20

3.4.4. Timeout is time period in seconds used for landing
detection. This time is then subtracted from flight time
FTime .
3.4.5. Suppress audio checkbox mutes the device when
waiting for takeoff.
3.4.6. Record always checkbox disables automatic start/stop of
logging. Logger records while device is turned on, until it
is turned off.
3.5. Pilot name field is used to be written in recorded tracklogs.
3.6. Glider type field is used to be written in recorded tracklogs.
3.7. Glider ID field is used to be written in recorded tracklogs.
4. Flight logs contains all recorded tracklogs arranged by their
date, showing basic flight statistics.
5. Navigation
5.1. Home position submenu defines its parameters.
5.1.1. Set as Takeoff checkbox set takeoff position as Home.
5.1.2. Load from SD set loaded waypoint as Home.
5.2. Waypoints
5.2.1. Load from SD allows user to choose waypoint from
loaded list.
6. GPS
6.1. Enable GPS checkbox enables/disables onboard GPS
receiver (significant for battery life).
6.2. Status shows available satellites and signal strength.
6.3. GPS time shows actual GMT time obtained from GPS
receiver.
6.4. GPS date shows actual date obtained from GPS receiver.
6.5. Speed units , used for ground speed widget GSpd, can be
chosen from
– m/s, km/h, mph or knots.