SkyArtec WASP v2, Operating Manual, Page: 7 / 10

WASP v2 manual
Page 7
Advice:
The helicopter´s swashplate can be set up in two ways. The long position will cause a stron-
ger reaction for nick and roll to the radio´s commands. You just need to change the long
connectors from the ball point head to the next one.
9. Spareparts and part numbers
WH2-001 frame connector WH2-017 tail rotor holder
WH2-002 pitch axis WH2-018 battery holder
WH2-003 compensator WH2-019 main gear
WH2-004 steering blades/axle WH2-020 tail rotor
WH2-005 bearing for main axle WH2-021 tail gear/axle
WH2-006 swashplate WH2-022 main frame
WH2-007 pitch frame WH2-023 landing gear
WH2-008 O-type connectors WH2-024 lipo battery
WH2-009 connector rotor holder WH2-025 receiver
WH2-010 rotor holder WH2-026 PCM transmitter
WH2-011 main blades WH2-027 tail boom
WH2-012 3in1 board WH2-028 tail bearing
WH2-013 mainmotor WH2-029 servo connector set
WH3-014 servo WH2-030 crystal pair
WH2-015 lipo charger WH2-031 canopy
WH2-016 tail motor WH2-032 pitch bearing