Assembly and Operating Manual 3D SU-26
12
Figs. 37
-Assemble the battery cover
to the fuselage.
Figs. 38
-Photo shows the finished view.
Fig. 39 Balancing
- Place the canopy on the fuselage.
- Place the battery in the model of balancing; do not
connect it.
- Make the Centre of Gravity on both sides.
- Support the model at the marked C.G. and allow it
to hang freely. The model is correctly balanced
when it hangs level, ideally with the nose inclined
slightly down.
- Adjust the position of the flight battery if necessary.
- Mark the battery location in the fuselage, so that
you can be confident of replacing it in the same
position after removing it.
37
38
39