1.
Press RESET button
2.
Press ON button for a couple of seconds
3.
Take out the battery
Charge the battery
Before using the device for the first time or if the battery has not been used for a long time, you
need to charge the battery.
Use only approved chargers, batteries and cables. Unapproved chargers or batteries can damage
the battery or the device.
Connect the small end part of the charger to the device’s multifunction slot and the big end part
of the charger to an electric source.
If you connect the charger in a wrong way, you can seriously damage the device. The warranty
does not cover damage caused by an inappropriate use.
After charging is complete, disconnect the device from the charger. Disconnect first the charger
from the device and then from the electric source. Do not take out the battery before
disconnecting the charger. This can damage the device.
The charger does not have ON/OFF button, so, in order to cut the electrical supply, the end user
should disconnect the charger from the electric source. Please keep the charging cable close to
the device when it is charging, to avoid it to be tight. To save energy, disconnect the charger
when it is not in use.
Information about security
This section contains information about mobile security. Some content may not apply to your
device. To avoid injury to yourself and others, or damage to the device, read the safety
information before using the device.
Warning Failure to comply with these rules and security warnings, the end user could suffer
serious injury or death.
Do not use damaged power cables or connectors or loose plugs. Insecure connections can cause
electrical shock or fire
Do not touch the power cord with wet hands or pull the cord to disconnect the charger. Doing
so could end up in electrocution.
