Sky IM-5000, User Manual, Page: 67 / 74

Enter new password again to confirm.
Data service
You can set environment for data service including Internet / PC communication / FAX.
1. Press [Menu], 5[Environment Setting], [Set Data Communication] and [Select] in turn, and select
receiving mode.
Press [Scroll] to confirm.
2 Set Internet speed – Press [Scroll], and press [OK] after moving to the item you want using
[Up/Down] keys.
3. Baud rate with PC - Set interface rate between PC and mobile phone.
Press[Up/Down] to select the item, and press (OK).
4. Press [Save].
Set receiving mode
For Modem and FAX, you should select Modem Mode or FAX Mode. However, you do not need to set
receiving mode for Modem or FAX origination.
Set Internet speed
You can use high speed wireless data communication of up to 153 Kbps with CDMA 2000 1X support.
Internet service rate is divided into 9.6 Kbps, 14.4 Kbps and 64Kbps.
You can use Internet service in the maximum rate of 64 Kbps.
In normal rate, you can use Internet service in the rate of 9.6 Kbps or 14.4 Kbps. 9.6 Kbps is provided
when 14.4 Kbps is unavailable.
It is much stable to use data cable than to use IrDA when you use the Internet service in maximum
rate. You need to set “Communication with PC” in IrDA menu and is disconnected if you do not use
PC and phone for more than 10 minutes.
If there is no data receiving and transmitting for 4 minutes and 15 seconds during high-speed packet
data service, using data cable, ICON(dormant) will be displayed on the upper part of LCD. Fee is not
charged while the icon is displayed.
Baud rate with PC
The maximum speed in desktop/notebook is 115,200bps and you should insert I/D card or PCMCIA
Card in the desktop/notebook that supports high speed communication in order to set the
communication speed with PC as 230, 400 bps.
It supports up to 64 kbps for communication speed with PC when using IrDA.
The recommended speed for using fax data service is 19,2000 bps.