DIGITAL
AUDIO
SAT IN1
NETWORK
HDMI
USB
12V = IN
SAT IN2
Unplug
If you are replacing your current Sky Box, please
unplug all of the cables from your current Sky
Box.
Please use th
ose
supplied with your new Sky
Box
.
Plug In
1.
To get started, connect your new Sky Box to
your TV with the HDMI cable. Make sure that
it matches the input that’s selected on your TV
(e.g. HDMI 1).
2.
Screw in your satellite cable into this SAT IN1 port.
3.
This is for your Ethernet cable which gives
you the fastest internet connection. If your
WiFi router is close by, plug one end of your
Ethernet cable in here and connect the other
to your router. If it’s not close by, you can
connect wirelessly during the on screen set up.
4.
Plug in the power cable here and plug the power
supply into a power source. Switch on the power
and the system will boot up automatically.
5.
Connecting your remote to your new Sky Box is
easy: simply remove the plastic pull tab from the
battery cover on your remote. The batteries will
connect and automatically pair with your Sky Box.
1
2
3
4
Summary of Contents for Box
Page 1: ...Sky Box Quick Start Guide ...
