48
WLAN connection can’t be established
Check the availability of WLAN network on the access point.
Place the device closer to the router.
Make sure the WEP/WPA password is correct.
No station is found
Check the network as well as the access point and firewall.
The station may not be available currently, try it again later or select
another station.
The link of the station is changed or the station no longer transmits – ask
the provider for information.
The link of manual added station is not correct, make sure it is correct
and re-enter.
Alarm does not work
Switch on the alarm.
Due to the volume setting, refer to the solutions of “No sound”.
The source of alarm was set to be station but there is no network
connection. Change the source of alarm or reconfigure the connection.
Unable to do DLNA streaming.
Check the connection of the network. IR60S + IR61W and your device
need to be in the same network, and test if the network in good condition.
Make sure the settings on your device are correct.
Electro-Magnetic Interference
The normal function of the product may be disturbed by strong Electro-
Magnetic Interference. If so, simply reset the product to resume normal
operation by following the instruction manual. In case the function could
not resume, please use the product in other location.
System freezes suddenly
The radio is overloaded, reboot the unit.
Summary of Contents for IR 60S
Page 52: ...Ref IR 60S IR61W 15 2018 01 ...
