![sky vision DAB 10G Instruction Manual Download Page 15](http://html1.mh-extra.com/html/sky-vision/dab-10g/dab-10g_instruction-manual_1289877015.webp)
6
Charging & get started.
1.
Use the USB cable to connect product to 5V USB port for charging
2.
Fully charge it before use.
3.
Insert the earphone, which is used as antenna too.
4.
Long press Power button to turn on.
Power
1.
Long press for 2 seconds to turn on/off.
2.
Short press to switch mode between DAB
+
and FM.
Enter
This radio has 3 operation modes in FM and 2 modes in DAB.
FM mode: Normal, PSCAN, PMEM.
DAB mode: Normal, PMEM.
Enter key is used to switch different operation modes and confirm the selected channel.
Function of Enter under FM mode is defined as below (same operation under DAB
+
mode):
1. Normal mode (No display TEXT in STATUS ICON Line):
Press (+) / (-) to adjust frequency at one step of 100KHz, Hold (+) / (-) to start seeking
next or previous available channel.
2. PSCAN mode (Display PS xx where xx is the total number of found FM stations): Hold
TUNE+/- to start preset scan to search all available channels in FM band and then store
into memory.
Press TUNE+/- to select stored channels.
20 FM stations can be stored.
3. PMEM mode (Display MEM xx where xx is total number of used memory):
*PMEM means Personal Memory, which
store the personal’s
favorite channel in memory.
PMEM capacity is 20 channels.
Holding Enter key in NORMAL or PSCAN mode until Pxx (where xx is current memory
number) is appeared to ADD listening channel to PMEM.
Next/TUNE+/ and Previous /TUNE-
To manually or automatically adjust radio frequency as descripted in above operation.
To go to stored radio channels directly.