sky viper s670 Instruction Manual Download Page 5

Drone responsiveness may be adjusted on the 

Controller to match your 

fl

ying skills. 

There are three choices:

1. LOW – 2. MEDIUM – 3. HIGH SENSITIVITY

It is best to start in 

LOW

 

POSITION

 until you have 

mastered 

fl

ying.

Flight sensitivity can be adjusted before or during 

fl

ight.

1

 

Press to turn 

OFF

 Remote Control.  

2

 

Unplug the Drone LiPo battery. 

Disconnect by pulling connectors apart—

Do not pull wires.

3

 

Reconnect Drone LiPo battery. 

4

 

Quickly place Drone on FLAT LEVEL 

SURFACE.

5

 

Press to turn Remote Control 

ON

.

6

 

Slowly push remote control THROTTLE 

STICK 

UP

 until Drone lifts into the air.

IMPORTANT:

 YOU ONLY HAVE A FEW 

SECONDS AFTER THE LIPO BATTERY IS 

PLUGGED IN TO PLACE DRONE ON A 

LEVEL SURFACE FOR PROPER CALIBRA-

TION. IF DRONE DOES NOT RISE TO A 

STABLE HOVER OR FLIES ERRATICALLY, 

REPEAT STEPS 1 THROUGH 6.

CAUTION:

 NEVER APPROACH DRONE 

WHILE THE PROPELLER BLADES ARE 

STILL SPINNING. THROTTLE DOWN UNTIL 

THE BLADES STOP THEN TURN OFF 

REMOTE BEFORE ATTEMPTING TO 

HANDLE DRONE. 

NOTE:

 THE REMOTE WILL BEEP/FLASH 3 

TIMES WHEN TRIM ADJUSTMENT IS SET TO 

THE NEUTRAL POSITION (THE MIDDLE OF THE 

TRIM RANGE) AND BEEP ONCE WHEN IT HAS 

REACHED THE END OF IT’S RANGE.  

FLIGHT SENSITIVITY ADJUSTMENT

TRIM ADJUSTMENTS

CALIBRATING 

LAUNCHING

1 - LOW 2 - MEDIUM 3 - HIGH

t

  Drone drifts forward (Fig. 1) 

– Press the 

B button

 

t

  Drone drifts backward  (Fig. 2) 

– Press the 

F button

t

  Drone drifts to the left  (Fig. 3) 

– Press the 

R button

 

t

  Drone drifts to the right  (Fig. 4) 

– Press the 

L button

t

  Drone spins counter-clockwise, when viewed from the top  (Fig. 5) 

– Press the        

button

t

  Drone spins clockwise, when viewed from the top  (Fig. 6) 

– Press the        

button

If Drone drifts in any direction while hovering (and you are not pressing the 

Direction stick), you may need to make trim adjustments. Safely land Drone 

on a level surface. Press the recommended Trim button once as described 

below. Launch Drone back into the air and attempt another still hover. If 

Drone continues to drift, repeat the process until the Drone hovers in place:

1

2

3

4

5

6

1

3

2

4

5

6

7

4

SIZE: 297 x 210mm (folds to 148.5 x 210mm)

PAGE 7 / PAGE 4

3A

Summary of Contents for s670













Reviews: