background image

OFF

Drone responsiveness may be adjusted on the Controller 

to match your 

fl

ying skills. 

There are two choices:

1- LOW SENSITIVITY     2– HIGH SENSITIVITY

It is best to start in the 

LOW SENSITIVITY

 position 

until you have mastered 

fl

ying.

Flight sensitivity can be adjusted before or during 

fl

ight.

1

 

Turn 

OFF

 Remote Control.  

2

 

Move the switch on the rear of the Drone to the 

OFF

 position.

3

 

Now move the same switch on the Drone to the 

ON

 position.

4

 

Quickly place the Drone on a 

FLAT LEVEL SURFACE.

5

 

Turn Remote Control 

ON 

(Middle position).

6

 

Slowly push remote control THROTTLE STICK 

UP

 until Drone lifts into the air.

IMPORTANT:

 YOU ONLY HAVE A FEW 

SECONDS AFTER THE DRONE IS 

SWITCHED ON TO PLACE THE DRONE ON 

A LEVEL SURFACE FOR PROPER CALIBRA-

TION.  IF DRONE DOES NOT RISE TO A 

STABLE HOVER OR FLIES ERRATICALLY, 

REPEAT STEPS 1 THROUGH 6.

CAUTION:

 NEVER APPROACH DRONE 

WHILE THE PROPELLER BLADES ARE 

STILL SPINNING. THROTTLE DOWN UNTIL 

THE BLADES STOP THEN TURN OFF 

REMOTE BEFORE ATTEMPTING TO 

HANDLE DRONE. 

t

  Drone drifts forward (Fig. 1) 

– Press the 

B button

 

t

  Drone drifts backward  (Fig. 2) 

– Press the 

F button

t

  Drone drifts to the left  (Fig. 3) 

– Press the 

R button

 

t

  Drone drifts to the right  (Fig. 4) 

– Press the 

L button

t

  Drone spins counter-clockwise, when viewed from the top  (Fig. 5) 

– Press the        

button

t

  Drone spins clockwise, when viewed from the top  (Fig. 6) 

– Press the        

button

If Drone drifts in any direction while hovering (and you are not pressing the 

Direction stick), you may need to make trim adjustments.  Safely land Drone 

on a level surface. Press the recommended Trim button as described below. 

(Remark - When the remote LED 

fl

ashes 3 times quickly, the trim just goes 

back to the middle of trim range). You still need to trim it as described if 

you 

fi

nd drone drift. Launch Drone back into the air and attempt another 

still hover. If Drone continues to drift, repeat the process until a still hover 

is achieved:

TRIM ADJUSTMENTS

FLIGHT SENSITIVITY ADJUSTMENT

CALIBRATING 

LAUNCHING

1

2

3

4

5

6

1

2

3

4

5

6

HIGH

LOW

OFF

OFF

ON

OFF

ON

OFF

1

2

7

4

SIZE: 297 x 210mm (folds to 148.5 x 210mm)

PAGE 7 / PAGE 4

3A

Summary of Contents for m200 Nano Drone













Reviews: