9
Flying
Craft/Remote Link
Before flying, the craft and the remote must be linked together and the gyroscopes on the
craft must be allowed to calibrate.
Begin with the battery removed and the remote powered OFF.
Step 2
Power ON the remote control.
The light on
the remote will blink as it searches for the
signal from the craft. A chime will sound and
the lights on the craft and the remote will
blink in unison when they have linked with
each other.
Step 3
Push the
Left Control Stick (throttle
) fully
forward then pull the stick fully rearward.
When a chime has sounded the craft is
ready to fly.
Step 1
Power ON the craft
by inserting the battery
in the compartment and connecting it to the
power cable attached to the craft. The LED
lights will blink as the craft searches for a
signal from the remote.
Place the craft on flat surface so that its
gyroscopes can properly align.
