14
Mount your landing leg, landing poles and landing caps.
Screws used: M3*16mm + M3 locknuts
Tip : Check the for correct logo orientation
-
15
Screw the quick release nut on landing gear holder and
slide legs into it.
Tip : Do not over tight the nut and never tight it with no leg
into it
-
16
Drill a 8mm hole in your canopy and glue the grommet
holder in place.
Tip : Drill first a small hole, and use a reamer to get the
right size, use thich CA glue
17
Mount the grommet into holder,
fix the canopy with the body clip.
Assembly instructions Spyder / Kits SKH00-401, SKH00-402 & SKH00-403 /
Page 5
/5
