background image

28

LIMITED WARANTY

WARRANTY AND REPAIRS

Warranty  requests  will  be  processed  only with  an  original  proof  of  purchase  from  an  authorized 

SKY-HERO 

dealer, 

showing the name of the buyer as well as the date of purchase. If the case for Warranty is confirmed, the product will be 
repaired. Only 

SKY-HERO

 will be able to take the decision about repairing the product.

In case of paid repairs, we establish a quote that we pass to your dealer. The repairs will be carried out only after we have 
received confirmation from the dealer. The price of the repairs must be paid to the dealer. For chargeable repairs, we 
charge at least 30 minutes of work in the workshop as well as forwarding fees. In the absence of an agreement for the 
repairs within a period of 90 days, we reserve the option to destroy the product or use it otherwise.

WARRANTY PERIOD

Exclusive Warranty: 

SKY-HERO

 ensures the product purchased (the «Product») will be free from defects in improper 

materials and workmanship (subject to the terms set forth herein) in accordance with the official documentation for the 
applicable Warranty Period from the date of retail purchase. Warranty is governed by and construed under the laws of the 
country in which the original product purchase took place. The warranty period is 6 months and the duration of warranty 
obligation of 18 months at the expiration of the warranty period.

WARRANTY LIMITATIONS

(a) The Warranty applies only to the original purchaser and is not-transferable. The Purchaser’s legal rights consists of 
repair or exchange under this Warranty. The Warranty applies only to products purchased from an authorized dealer of 

SKY-HERO

 products. Sales via third parties are not covered by this Warranty. Your “Little 6” is covered by this Warranty 

under the specified Warranty period starting from the original purchase date. Proof of the original purchase date is requi-
red for Warranty service. 

SKY-HERO

 reserves the right to modify the provisions of this Warranty without prior notice and 

then revokes the existing Warranty provisions.
(b) 

SKY-HERO

 assumes no Warranty as to the merchantability of the product capabilities and the physical form of the 

user for a given use of the product. It is the sole responsibility of the Buyer to verify whether the product corresponds to 
its capacity and intended use.
(c) Buyer’s rights: 

SKY-HERO

 will inspect the product and in its sole discretion repair or replace it with a refurbished 

product or functional equivalent. These are the Buyer’s exclusive legal rights of recovery where a defect is found. The 
decision made by 

SKY-HERO

 shall be final and binding upon you.

SKY-HERO

 may refuse to provide inspection, repair or replacement service for products that are out of 

Warranty and will charge fees if these services are provided for out-of-warranty products.

Damage or alteration of Warranty, quality or authenticity stickers, and/or product serial or electronic numbers, unautho-
rized repair or modification, or any physical damage to the product or evidence of opening 
or tampering with the product casing will also avoid this Warranty.

ATTENTION:

We only carry out and cover repairs (under valid warranty) to electronic components and engines. 
Repairs to anything else, must therefore be carried out by the purchaser themself.

Summary of Contents for Little Six
































Reviews: